How To Install Electric Meter Box
As a family-owned and operated electrical business, B&K Electric is rooted in community and customer service. We understand the importance of having a reliable and efficient electrical system in your home, and we strive to provide exceptional service to all our clients. In this article, we will guide you through the steps of installing an electric meter box, helping you gain a better understanding of the process and ensuring that your home’s electrical system is up to standard.
Before we get into the details of installing an electric meter box, it’s important to understand what it is and why it’s necessary. Simply put, an electric meter box is a small structure that houses the electric meter for your home. The meter is used to measure the amount of electricity used in your household, allowing the electric company to bill you accordingly. It also serves as a connection point between the electric company’s power and your home’s electrical system.
Now that you have a basic understanding of the purpose of an electric meter box, let’s dive into the steps of installing one.
Step 1: Obtain Required Permits
Before starting any electrical work, it’s essential to obtain the necessary permits from your local government. In this case, you will need an electrical permit to install an electric meter box. This ensures that the installation is done safely and meets all building codes and regulations. Failure to obtain the required permits can result in fines or even legal issues in the future.
Step 2: Turn Off Power
The next step is to turn off the power to your home. This is a crucial step to ensure your safety while working on the electrical system. Locate the main circuit breaker or fuse box and turn it off. It’s also advisable to wear rubber gloves and safety goggles during this process. Once the power is off, you can proceed with the installation.
Step 3: Choose the Location
When installing an electric meter box, location is key. It should be easily accessible for meter readers and ideally located in a shaded area to protect it from direct sunlight and harsh weather conditions. Choose a flat surface, preferably a wall that is at least five feet off the ground to ensure the meter is visible and readable.
Step 4: Install the Box
First, mount the electric meter box onto the chosen location using screws and a screwdriver. Next, using a drill, make a hole in the wall right behind the box’s location to allow easy access for wiring. Then run the electrical wires through the hole and into the panel box.
Step 5: Connect the Wires
Inside the electric meter box, you will find a variety of wiring terminals. These may be labeled differently depending on the manufacturer, but typically, there are three terminals: Line, Load, and a Ground. Connect the Line wire from the electric company to the Line terminal, followed by the Load wire connected to the Load terminal, and finally, the Ground wire is connected to the Ground terminal. It’s essential to ensure that all connections are secure to prevent any electrical hazards.
Step 6: Verify Proper Installation
Before finishing up the installation, it’s vital to verify that all connections are secure and correctly placed. Turn the power back on and check the electric meter box for any signs of malfunction. If everything looks good, turn the power off again and proceed to the next step.
Step 7: Install the Meter
Finally, install the electric meter in the meter box, aligning the terminal blades with the corresponding terminals in the box. Secure the meter in place by tightening the locking ring around it. Once the meter is installed, turn the power back on and check to see if it’s functioning correctly. If all is well, congratulations, you have successfully installed an electric meter box!
Installing an electric meter box may seem like a daunting task, but with the right knowledge and guidance, it can be easily accomplished. However, if you are unsure or uncomfortable with handling electrical work, it’s best to hire a licensed electrician to ensure the safety and efficiency of your home’s electrical system. B&K Electric is your trusted go-to electrician for all your electrical needs in Warwick and the greater Providence area. Let us help you keep your home’s electrical system in top shape.