How To Wire A Switch To Control 2 Outlets
As a homeowner in zip code 02908, Elmhurst, Providence County, Rhode Island, you know the importance of maintaining a safe and efficient electrical system. Whether it’s for your home or your business, it’s crucial to have a reliable and functioning electrical setup to avoid any potential hazards. That’s where B&K Electric comes in. With over seventeen years of experience serving the residents of Cranston, Warwick, and all of Rhode Island, we specialize in electrical repair, panel maintenance, and installation. As a family-owned and operated business, we understand the importance of community and providing top-notch customer service. So if you’re in need of an electrician for your home or business in the Warwick area and greater Providence area, look no further than B&K Electric.
One common electrical issue that homeowners face is the need to control multiple outlets with one switch. This can be a useful feature for lighting circuits, lamps, or any other appliances that you want to control simultaneously. In this article, we will guide you through the process of wiring a switch to control two outlets safely and effectively. But before we dive into the steps, let’s first understand the basics of wiring and the tools you will need.
Understanding the Basics of Wiring
Wiring is a crucial aspect of any electrical system as it allows electricity to flow from one point to another. For this task, it is vital to have a good understanding of electrical safety and follow the appropriate precautions. It is also essential to have a basic knowledge of electrical circuit diagrams, which illustrate how electricity flows through wires, switches, and outlets. Before attempting to wire a switch to control two outlets, make sure to turn off the power at the circuit breaker and have all the necessary tools at hand.
Tools You Will Need:
-Live wire tester
-14-2 non-metallic cable (NM)
-Romex cable connector
Now let’s get into the steps of wiring a switch to control two outlets.
Step 1: Turn off the Power and Test the Circuit
Before you begin any wiring project, make sure to turn off the power at the circuit breaker. Use a live wire tester to ensure that there is no electricity flowing through the wires. It is essential to follow this step to avoid any accidents or electrocution.
Step 2: Cut the Cable and Strip the Wires
Using a utility knife or wire stripper, cut a piece of NM cable to the preferred length from the electrical panel to the switch. Strip about ¾ inch of the plastic coating from the cable to expose the wires inside.
Step 3: Connect the Cable to the Switch
Insert the cable through a Romex cable connector and tighten it in place. Connect the black wire (hot) to one screw terminal of the switch and the white wire (neutral) to the other screw terminal. Connect the bare wire (ground) to the green grounding screw.
Step 4: Connect the Switched Cable to the Outlets
Using wire nuts, connect the black wire (hot) from the cable to the brass screw of the first outlet. Connect a piece of black wire from the brass screw of the first outlet to the brass screw of the second outlet. Connect the white wire (neutral) from the cable to the silver screw of both outlets. Connect the bare wire (ground) to the green grounding screws of both outlets.
Step 5: Test and Secure the Outlets
Test the outlets by turning on the power and plugging in a small appliance or lamp. If it works, turn off the power and secure the outlets to the electrical box using screws. Cover the outlets with a faceplate and turn the power back on.
Note: For a more thorough explanation and visual guide, you can refer to videos or ask for help from a licensed electrician.
The main takeaway
By following these steps, you can wire a switch to control two outlets safely and effectively. However, if you’re not confident in your wiring abilities, it’s always best to seek the help of a professional electrician. At B&K Electric, we have a team of licensed and experienced electricians who can assist you with any wiring needs. Located in Warwick, Rhode Island, we serve both residential and commercial clients in the Warwick area and greater Providence area. So for all your electrical needs, trust in B&K Electric to provide high-quality and reliable services.